Spa Insulation

Bonded Logic Natural Fiber Spa Insulation is made from post consumer recycled denim that is thermally bonded. Natural Fiber Spa Insulation is a Class-1 fire rated material that offers excellent thermal and acoustical performance. Natural Fiber Spa Insulation contains no fiberglass and does not itch or cause skin irritation. It is treated with a non-toxic solution that actively inhibits the growth of mold, mildew, bacteria and fungi. This same treatment also acts as an excellent fire retardant, giving Natural Fiber Spa Insulation a Class-1 Fire Rating.

Spa

Uses

Use UltraTouch Cotton Fiber Spa Insulation in spa units to reflect radiant heat from pumps and equipment back into the spa, where it can be absorbed into the plumbing. Heating efficiency will be improved by raising and maintaining water temperatures with less energy required. These factors lead to overall lower energy use and savings. UltraTouch Cotton Fiber Spa insulation makes maintenance work an efficient and easy affair. Unlike foam options, the insulation panels can be removed and reinstalled quickly, without affecting long-term performance.

Product Features

  • Excellent Noise Absorption
  • Strong Thermal Protection
  • No Itch or Skin Irritation
  • Resists Microbial Growth

Supporting Materials

Standard Available SizesStandard Available Sizes

Standard Available Sizes
Thickness Foil Sides Length Width Weight
Inches Millimeters Feet Meters Feet Meters Pounds Kilograms
3" 76.2mm Single 7 2.1 2.75 0.8 6 2.7
3" 76.2mm Double 7 2.1 2.75 0.8 6 2.7
3/8" 9.5mm Single 6 1.8 4 1.2 6 2.7
3/8" 9.5mm Dual 6 1.8 4 1.2 8 3.6
3/8" 9.5mm Single 75 13.7 4 1.2 65 29.5
3/8" 9.5mm Dual 75 13.7 4 1.2 75 34

Thermal PerformanceThermal Technical Data Tested in accordance with ASTM C 177 and ASTM C 518

Thermal Technical Data
Position Up Down Horizontal R-Value Per Inch
R-Value 7.85 16.39 9.91 3.91
*The higher the R-Value, the greater the insulating power.

Acoustical PerformanceAcoustical Performance Sound Absorption was tested in accordance with ASTM C 423 using a type A mounting per ASTM E 795

Acoustical Performance
Product Absorption Coefficients & Octave Band Frequencies (Hz)
The Insulator 125 250 500 1000 2000 4000 NRC
⅜ Pad .12 .10 .23 .56 .81 .89 .45

Physical PropertiesPhysical Properties

Physical Properties
Property Performance Test Method
Surface Burning Characteristics Flame Spread 10 (Class 1) ASTM E 84
(Fire Hazzard Classification) Smoke Developed 20 (Class 1) UL 723
Zero Surface Burn Rate Exceeds Standard (Less than ⅕ in / min) FMVSS 302
Facing 99% Pure Aluminum Reinfored Foil
Foil Emissitivity .03 ASTM E 408
Foil Reflectivity 97% ASTM E 408
Tensile Tear Strength 100 lbs
Pad Weight 3 oz / s.f.