Insul-Knife
UltraTouch cotton batt's are essentially a textile product and is therefore different to cut then traditional insulating products. The best way to cut UltraTouch is with a non-motorized product called the Insul-Knife.
The Insul-Knife is available from Cepco Tool and can be purchased from Amazon.com as well as directly from Cepco Tool at www.cepcotool.com.
Bosch Foam Rubber Cutter
For motorized cutting, the Bosch Foam Rubber Cutter 1575A works extremely well. Click here for more information. A circular saw works well also. A fine tooth blade should be used and the blade should be installed with the teeth facing opposite of normal cutting installations. This will minimize shredding and tearing of the material and give you a smooth, clean cut.
Hand Held Grinding Tool
A hand held grinding tool is an effective way to cut UltraTouch insulation. These tools come in a variety of sizes and some are even cordless. This tool spins at a very high RPM, so caution should be used at all times. Anytime you are working with a motorized tool, the proper protective measures should be followed including wearing safety glasses or other eye ware.
Full Length Table Saw
The quickest and easiest way to cut UltraTouch in full lengths is the use of a table saw. A table saw will allow you to easily cut the material and change widths accurately and quickly. A fine tooth blade should be used and should be installed in reverse of normal operation. (the teeth should be at an opposite angle than if cutting wood). As with any power tool, caution should be taken and proper eye protection should be used.
